Hydrogen Water Bottle — Portable PEM Hydrogen Water Generator (460 ml)
A portable SPE/PEM hydrogen water generator in bottle form. Fill it with clean drinking water, press once, and it makes hydrogen-rich water in five minutes.
$85.50$29,999.00Taxes and shipping calculated at checkout
- 460 ml high-borosilicate glass body on a stainless-steel base
- SPE/PEM dual-chamber cell vents ozone and chlorine away from your water
- Five-minute cycle, stops automatically
- 1200 mAh battery: 2–3 hours to charge, around 15 cycles
- USB Type-C behind a waterproof silicone cover
- Includes charging cable, cleaning brush and manual
Use clean drinking water only. The membrane needs a one-off warm-water soak before first use — see the setup guide.
This is a hydration device, not a medical device. It is not intended to diagnose, treat, cure or prevent any disease.
SPE/PEM technology
1200 mAh rechargeable
460 ml borosilicate glass
5-minute cycle
How it works
Four steps to hydrogen-rich water
Always follow the instructions in the manual supplied with your bottle.
-
01
Fill
Add clean drinking water — filtered, bottled or reverse-osmosis — leaving a few centimetres of headroom.
-
02
Activate
Press and hold the button on the base to start a generation cycle.
-
03
Generate
The SPE/PEM cell runs for five minutes. The LED display counts down and shows concentration and battery level.
-
04
Drink
The bottle stops automatically. Hydrogen dissipates over time, so drink it fresh.
Technology
What SPE/PEM actually does
Electrolysis produces hydrogen at one electrode and oxygen — plus potentially ozone and chlorine — at the other. A proton-exchange membrane keeps the two apart, so hydrogen dissolves into your water and the rest is vented through a separate channel in the base.
Because the membrane doubles as the electrolyte, no salts or additives are needed. Plain drinking water is all that goes in.
Full details
Everything about this hydrogen water bottle
Hydrogen Water Bottle for Hydrogen-Rich Water Anywhere
Enjoy hydrogen-rich water wherever your day takes you with the Hydrojen Hydrogen Water Bottle. Designed as a portable hydrogen water generator, it combines a built-in SPE/PEM electrolysis system, rechargeable battery and LED display in a convenient 460 ml bottle.
Unlike countertop hydrogen water systems, Hydrojen is designed for everyday portability. Fill the bottle with clean drinking water, start a generation cycle, and enjoy freshly generated hydrogen-rich water without plumbing, an app or a subscription.
How the Hydrojen Hydrogen Water Bottle Works
Using SPE/PEM electrolysis technology, the built-in hydrogen generator produces hydrogen for dissolution into the water.
- Fill — Add clean drinking water such as filtered, bottled or reverse-osmosis water, leaving a little headroom.
- Activate — Press and hold the button on the base to start the generation cycle.
- Generate — The SPE/PEM system runs a five-minute cycle while the LED display shows the remaining cycle time and battery level.
- Drink fresh — When the cycle finishes, the bottle stops automatically. For the freshest hydrogen-rich water, drink it soon after generation.
Advanced SPE/PEM Hydrogen Water Technology
The Hydrojen Hydrogen Water Bottle uses a solid polymer electrolyte (SPE) and proton-exchange membrane (PEM) electrolysis system.
During electrolysis, an electrical current is used to separate water molecules. The membrane helps manage the gases produced during the process, allowing hydrogen to be generated for dissolution into the water.
This integrated hydrogen water technology gives you a portable way to generate hydrogen-rich water without a countertop generator or complicated setup.
Key Features
- 460 ml portable hydrogen water bottle — Convenient single-serve capacity for your desk, bag, travel or cupholder.
- SPE/PEM electrolysis technology — Built-in hydrogen generation system designed for portable use.
- Five-minute generation cycle — Quickly generates hydrogen-rich water at the touch of a button.
- High-quality borosilicate glass — Food-grade glass designed to handle everyday temperature changes.
- Smart LED display — Shows generation time and battery information during use.
- 1200 mAh rechargeable battery — Provides approximately 15 cycles per charge under typical conditions.
- USB Type-C charging — Convenient charging through the protected USB-C port.
- Non-slip silicone base — Helps keep the bottle stable during a generation cycle.
- Simple one-button operation — No app, plumbing or subscription required.
Why Choose a Portable Hydrogen Water Bottle?
A countertop hydrogen water generator can be useful at home, but it is not always practical when you're away from the kitchen.
Hydrojen brings hydrogen water generation into a portable bottle format. Whether you're at your desk, travelling or heading out for the day, the integrated generator makes it simple to prepare hydrogen-rich water wherever clean drinking water is available.
Specifications
| Capacity | 460 ml |
|---|---|
| Dimensions | 9.25 in (height) × 2.76 in (diameter) |
| Bottle body | High borosilicate glass |
| Base | Stainless steel with non-slip silicone foot |
| Hydrogen technology | SPE/PEM dual-chamber electrolysis |
| Hydrogen concentration | Shown on the built-in PPB display during each cycle |
| Cycle duration | 5 minutes |
| Battery | 1200 mAh rechargeable |
| Charging | USB Type-C, approximately 2–3 hours to full |
| Uses per charge | Approximately 15 |
| Display | LED — remaining cycle time, PPB and battery level |
| Water to use | Clean drinking water only — filtered, bottled or reverse-osmosis |
| Colours | Silver, Black |
What's in the box
- Hydrogen water bottle
- USB Type-C charging cable
- Cleaning brush
- User manual
Before your first use
The membrane inside a new bottle is dry and needs activating. Fill the bottle with warm water at roughly 40–50 °C and leave it to stand for 2–3 hours, then pour the water away and charge the bottle fully before the first cycle. Follow the steps in the manual supplied with your bottle.
Care
Rinse the glass body with the supplied brush. The base contains the battery and electrolysis cell, so do not submerge it. Never put juice, tea, milk, sparkling water or any liquid other than clean drinking water into the bottle — carbonated drinks in particular can build up pressure and damage the device.
This product is a hydration device. Nothing here is a medical claim, and it is not intended to diagnose, treat, cure or prevent any disease.
FAQ
Questions about this bottle
Do I need to do anything before the first use?
Yes. The membrane ships dry. Fill the bottle with warm water at roughly 40–50 °C, leave it for two to three hours, pour it away, then charge the bottle fully before your first cycle.
What type of water should I use?
Clean drinking water only — filtered, bottled or reverse-osmosis. Never use juice, tea, milk, sparkling water or any other liquid. Carbonated drinks in particular can build up pressure and damage the bottle.
What hydrogen concentration does it reach?
The bottle has a PPB display that shows the concentration for each cycle as it runs. We do not publish a single headline figure because real-world concentration depends on your water, its temperature and the age of the membrane.
How long does the battery last?
A full charge takes roughly two to three hours over USB Type-C and gives approximately 15 cycles.
How do I clean it?
Rinse the glass body and use the supplied cleaning brush. Do not submerge the base, which contains the battery and the electrolysis cell, and never put it in a dishwasher. Descale the membrane periodically if you use hard water.
Can I take it on a plane?
It contains a built-in lithium battery, so carry it in hand luggage rather than checked baggage, and empty it before security. Check your airline's current policy before you fly.
What is in the box?
The hydrogen water bottle, a USB Type-C charging cable, a cleaning brush and the user manual.
